Railway Communications Training Courses | UIC Headquarters Paris | September–October 2026 Learn more here.

Glossary of Telecoms Technology Terms

  • Idle Mode Meaning

    The idle mode in telecom refers to a state where a mobile device is connected to the network but is not actively transmitting or receiving...

  • Ieee 802.11 H

    IEEE 802.11h is a standard within the realm of telecommunications that specifically addresses the requirements for wireless local area networks (WLANs) operating in the 5...

  • Ieee 802.15

    IEEE 802.15 standards are relevant in the UK telecom market for enabling wireless personal area networks (WPANs). These standards define protocols for short-range wireless communication...

  • Imeisv

    IMEI stands for International Mobile Equipment Identity and is a unique 15-digit code assigned to every mobile device. In the UK market, IMEI plays a...

  • International Direct Dialing

    International direct dialing allows customers in the UK to make calls to other countries without the need for operator assistance. This service is provided by...

  • Ip Gw

    The default gateway in a telecommunications network is a crucial component that serves as the access point to other networks. In the UK market, the...

  • Ipxproxy

    Configuring an IPX Proxy in the UK telecom market involves setting up a secure gateway that enables the exchange of IP traffic between different networks....

  • Irsg

    IR35 in the UK telecom market refers to the tax legislation that aims to identify individuals who are working as disguised employees, thereby avoiding tax...

  • Isakmp Protocol

    The ISAKMP (Internet Security Association and Key Management Protocol) protocol is a key component in telecommunications networks for establishing secure communication channels. In the UK...

  • RAB (Radio Access Bearer)

    RAB (Radio Access Bearer) is a key concept in telecom networks, especially in the context of mobile communications. RAB refers to the communication channel that...

  • RAB Radio

    RAB (Radio Access Bearer) is a key concept in telecom networks, especially in the context of mobile communications. RAB refers to the communication channel that...

  • RFC 2544

    RFC 2544 is a network testing standard that is widely used in the telecommunications industry to measure the performance of network equipment. It provides a...

  • RLL Radio

    RLL radio technology, also known as Radio in the Local Loop, is a wireless telecommunications technology that enables the provision of local access services. In...

  • ROHC

    ROHC (Robust Header Compression) in Telecom is a crucial technology used to optimize data transmission efficiency, particularly in wireless networks. In the UK market, where...

  • RSL Radio

    RSL radio in telecom is a temporary radio station that operates under a Restricted Service License in the UK market. It is commonly used for...

  • RSL meaning

    May 09 2025 , by Paul Waite 1 min reading time   The term "RSL" in telecom stands for Radio Subsystem Link. In the UK market,...

  • RSVP Protocol

    The RSVP protocol in telecom is used in the UK market to establish and maintain quality of service (QoS) for real-time applications such as voice...

  • Reassociation

    Reassociation in telecom refers to the process of a mobile device switching between different cell towers as it moves within a network. Reassociation plays a...

  • Reference Signal

    Reference signal in telecom is a standardized signal used for synchronization and channel estimation in wireless communication systems. In the UK market, reference signals play...

  • Registered Jack

    Registered Jacks are commonly used in the telecommunications industry. These jacks are standardized connectors used for connecting telecommunication equipment, such as telephones and modems, to...

  • Reorigination

    Reorigination in telecom refers to the process of redirecting inbound calls to a different destination number. This feature is commonly to ensure seamless communication and...

  • Reverse Address Resolution Protocol

    Reverse Address Resolution Protocol (RARP) is a network protocol used in telecommunications to map a MAC address to an IP address. RARP plays a crucial...

  • SCG meaning

    SCG in telecom stands for Serving Cell Group. SCG refers to a group of cells that are serving a particular user equipment (UE). This grouping...

  • radio.link in

    The radio.link technology in telecom is a crucial component for establishing wireless communication networks. In the UK market, radio.link plays a significant role in providing...

Wray Castle Hub - The complete Telecoms Training Package

Unlimited access to a comprehensive library of material covering key technology and business topics within the telecoms industry.

  • 500+ hours of training material, 35+ Courses, and 1,000+ Videos.
  • Tutor support throughout your subscription.
  • Earn Digital Badges to demonstrate the depth of your knowledge

Login

Forgot your password?

Don't have an account yet?
Create account